Description
Plash® 2100
is a one-part, moisture-curing RTV (room temperature vulcanizing) acetoxy silicone that cures to a strong, washable, silicone rubber which maintains long-term durability, adhesion and flexibility. Excellent for a marine environment such as adhering our flexible light strips to pontoon boats or under the gunnels. Acetoxy has natural antibacterial properties and is suitable for kitchen and bath areas & NOT TO BE USED BELOW THE WATERLINE – UNLESS USED TO SECURE LEDS UNDER GATORBAK BUNK COVERS.
Non-slumping sealant. Can be applied to vertical or overhead surfaces without flowing or sagging. Because Plash® 2100 is a 100 percent silicone sealant, it has excellent resistance to weathering including ozone, ultra-violet radiation, freeze-thaw conditions and airborne chemicals. During cure, an acetic acid smell is produced. 250 PSI Tensile, 400 percent Elongation.
A simple bead on the back of the strip light, stick it, wipe away the excess, and you’re done! Plash® 2100 Marine Silicone provides an instant hold for IP68 flexible tape lights. A temporary fastener may be required and each end until cured as the weight of the wire may pull it off.
Excellent adhesion of our Flexible LED Light Strips to:
- bedliner
- sheet metal
- wood
- aluminum
- concrete
- polycarbonate
- brick
- concrete
- glass
- fiberglass
- carbon fiber
- plastic
- and more!
This is not regular silicone like the ones sold at the big box stores. Those will not bond with our lights. Even 3M® 5200 and Life Seal® will not bond to our flexible LED lights. Our strips must use this Plash 2100 silicone.
FEATURES:
- 100% RTV Silicone with no slump
- Can be applied overhead or vertically without sag
- Cures at room temperature and is tacky in 10 minutes
- Excellent resistance to mother nature including UV, high & low temperature changes including freezing, salt water and airborne chemicals
- Cures to a strong silicone rubber made to last
- Instant adhesion to Plash Flexible Light Strips
Reviews
There are no reviews yet.